Start Here

How do you Change, Replace, or Install Broken 1992-1994 Toyota Camry Headlight Replacement

Fits years: 1992, 1993, 1994

All Toyota Camry Headlights for sale Tools required:
  • Phillips screwdriver

  • 10mm socket/ratchet

Step 1: Lift the vehicle's hood.

Step 2: Using your Phillips screwdriver, remove the parking light's single retaining screw, and remove the parking light from the vehicle.

The retaining screw is located just above the parking light.

Step 3: Remove the vehicle's grille.

Remove the retaining screws/bolts to remove the grille from the vehicle.

Step 4: Remove the four 10mm retaining bolts that secure the headlight assembly in place. Two are located on each side.

Step 5: You can now pull the headlight assembly from the vehicle.

Step 6: Disconnect the wiring harness on the back of the headlight assembly.

Step 7: Attach the wiring harness to the back of the new headlight assembly.

Step 8: Secure the new headlight into place by tightening the four 10mm retaining bolts.

Step 9: Reattach the grille.

Step 10: Reconnect the wiring harness to the back of the parking light and secure into place by tightening the Phillips retaining screw.
These Part Change / Installation Instructions Apply to:

92 1992, 93 1993, 94 1994 Toyota Camry Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.