Start Here

How do you Change, Replace, or Install Broken 1992-1996 Toyota Camry AC Heater Blower Fan Motor Replacement

Fits years: 1992, 1993, 1994, 1995, 1996

All Toyota Camry for sale Tools required:
  • 8mm socket/ratchet

  • Phillips screwdriver

Step 1: Locate the protective panel that is just below the glove compartment on the passenger's side of the vehicle. By gently pulling on it, you can disengage the clips.

Step 2: Remove the two retaining Phillips screws on each side of the underside of the glove compartment. You can now remove the panel.

Step 3: Using the Phillips screwdriver (you'll need a small one), remove the two Phillips retaining screws that hold the wiring harness panel in place. You can now slide this bundle out of your way.

Step 4: With the blower motor now exposed, disconnect its wiring harness and remove the three 8mm retaining bolts. You can now pull the blower motor from the vehicle.

Step 5: Mount the new blower motor to the vehicle by tightening the three 8mm retaining bolts.

NOTE: Be sure that you have it lined up correctly and move the wiring harness out of the way!

Step 6: Reconnect the wiring harness to the blower motor.

Step 7: Secure the wiring harness panel by tightening the 2 Phillips screws.

Step 8: Reattach the protective panel by tightening the Phillips screws and snapping the tabs back into place.
These Part Change / Installation Instructions Apply to:

92 1992, 93 1993, 94 1994, 95 1995, 96 1996 Toyota Camry Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.