Start Here

How do you Change, Replace, or Install Broken 1992-1996 Toyota Camry AC Heater Blower Fan Motor Replacement

Fits years: 1992, 1993, 1994, 1995, 1996

All Toyota Camry for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 8mm socket/ratchet

  • Phillips screwdriver

Step 1: Locate the protective panel that is just below the glove compartment on the passenger's side of the vehicle. By gently pulling on it, you can disengage the clips.

Step 2: Remove the two retaining Phillips screws on each side of the underside of the glove compartment. You can now remove the panel.

Step 3: Using the Phillips screwdriver (you'll need a small one), remove the two Phillips retaining screws that hold the wiring harness panel in place. You can now slide this bundle out of your way.

Step 4: With the blower motor now exposed, disconnect its wiring harness and remove the three 8mm retaining bolts. You can now pull the blower motor from the vehicle.

Step 5: Mount the new blower motor to the vehicle by tightening the three 8mm retaining bolts.

NOTE: Be sure that you have it lined up correctly and move the wiring harness out of the way!

Step 6: Reconnect the wiring harness to the blower motor.

Step 7: Secure the wiring harness panel by tightening the 2 Phillips screws.

Step 8: Reattach the protective panel by tightening the Phillips screws and snapping the tabs back into place.
These Part Change / Installation Instructions Apply to:

92 1992, 93 1993, 94 1994, 95 1995, 96 1996 Toyota Camry Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.