Start Here

How do you Change, Replace, or Install Broken 1992-2003 Honda Accord, Acura CL, TL Wiper Switch Replacement

Fits years: 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003

All Dodge Dakota for sale Tools required:
  • Phillips screwdriver

  • Flathead screwdriver (small)


Step 1: Disconnect the vehicle's negative battery cable.

Step 2: Loosen and remove the Phillips screws (3) located on the underside of the steering column.

Step 3: You can now remove the 2-piece cover that surrounds the steering column.

Step 4: Turn the wheel to expose the Phillips screws (2) that secure the wiper switch stalk assembly in place. Loosen and remove these screws.


NOTE: You may need to turn the key to move the steering wheel enough to expose these screws.

Step 5: Using the flathead screwdriver, pry and remove the wiper switch. Disconnect the wiring harnesses (2) attached to the base of the switch stalk.

Step 6: Connect the wiring harnesses (2) to the new wiper switch.

Step 7: Insert the switch into the steering column, and secure it by tightening the Phillips screws (2).

Step 8: Reattach the trim panels that surround the steering column by tightening the Phillips screws (3).
These Part Change / Installation Instructions Apply to:

92 1992, 93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Dodge Dakota Replacement Instructions

Average Rating: 4.9 of 5 stars
19 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.