Start Here

How do you Change, Replace, or Install Broken 1993-1997 Dodge Intrepid Cooling Fan Replacement

Fits years: 1993, 1994, 1995, 1996, 1997

All Dodge Intrepid Cooling Fan Assemblies for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 13mm socket/ratchet with extension (2")

  • 10mm socket/ratchet with extension (2")

  • Flathead screwdriver (2)

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 13mm bolts (2) that are on the brace that spans the engine compartment. Remove this brace.

Step 3: Disconnect the wiring harnesses that power the cooling fans.

These clips are located in the center of the cooling fan assembly, near the bottom.

Step 4: Using the flathead screwdriver, remove the retaining clips (2) that hold the assembly to the radiator.

These are located on the top of the radiator mount.

Step 5: Using the 10mm socket/extension, loosen and remove the 10mm mounting bolts (4) that hold the cooling fan to the radiator.

Two are located on each side - one on the upper end and one on the lower end per side.

Step 6: Pry the retaining clips that hold the fan to the radiator free from the assembly.

NOTE: We recommend using the two flathead screwdrivers to pry them free. These clips are located where the mounting bolts rest. This can be tricky, so be patient!

Step 7: You can now lift and remove the cooling fan assembly.

Step 8: Insert the cooling fan assembly (connection end down).

The tabs on the assembly should fit snugly BEHIND the small brackets on the radiator.

Step 9: Reattach the clips and tighten the 10mm mounting bolts (4).

Step 10: Reattach the retaining clips (2) located on top of the radiator assembly.

Step 11: Connect the cooling fan wiring harness.

Step 12: Tighten the 13mm bolts (2) that hold the cross brace in place.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997 Dodge Intrepid Cooling Fan Assemblies Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.