Start Here

How do you Change, Replace, or Install Broken 1993-1997 Jeep Grand Cherokee Turn Signal Replacement

Fits years: 1993, 1994, 1995, 1996, 1997

All Jeep Grand Cherokee Turn Signal Lights for sale Tools required:
  • T2 Torx socket/driver


Step 1: Locate the retaining screw between the marker light and the headlight and remove it.

Step 2: Remove the retaining screw that is located just above the marker light casing.

Step 3: Remove the lower retaining screw that is beneath the marker light.

Step 4: You can now pull the marker light from the vehicle.

Step 5: Behind the marker light, you will find two more retaining screws. Loosen and remove them.

Step 6: You can now pull the turn signal casing from the vehicle.

Step 7: Disconnect the wiring harness on the back of the turn signal assembly.

Step 8: Connect the wiring harness to the back of the new turn signal and put it into place.

Step 9: Secure the turn signal assembly by tightening the two retaining bolts.

Step 10: Secure the marker light, and tighten the retaining screws that hold the assemblies in place.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997 Jeep Grand Cherokee Turn Signal Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.