Start Here

How do you Change, Replace, or Install Broken 1993-1998 Jeep Grand Cherokee Headlight Replacement

Fits years: 1993, 1994, 1995, 1996, 1997, 1998

All Jeep Grand Cherokee Headlights for sale Tools required:
  • T2 Torx Driver


Step 1: Locate the T2 Torx screw that is between the headlight assembly and the blinker and remove it.

Step 2: Remove the two T2 screws that hold the marker light in place.

Step 3: Remove the marker light, but leaving it connected, move it to the side.

Step 4: You can now pull the headlight assembly from the vehicle.

Step 5: Disconnect the wiring harness on the back of the assembly.


NOTE: If you purchased your replacement headlight from Go-Parts, it likely includes the bulbs (as most of our models do). This saves you time, and allows you to move on to the installation of the new assembly.

Step 6: Connect the wiring harness to the new headlight assembly and move it into position.

Step 7: Secure the marker light by tightening the T2 mounting screws.

Step 8: Tighten the T2 screw that rests between the headlight assembly and the blinker.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998 Jeep Grand Cherokee Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.