Start Here

How do you Change, Replace, or Install Broken 1993-1998 Jeep Grand Cherokee Headlight Replacement

Fits years: 1993, 1994, 1995, 1996, 1997, 1998

All Jeep Grand Cherokee Headlights for sale Tools required:
  • T2 Torx Driver

Step 1: Locate the T2 Torx screw that is between the headlight assembly and the blinker and remove it.

Step 2: Remove the two T2 screws that hold the marker light in place.

Step 3: Remove the marker light, but leaving it connected, move it to the side.

Step 4: You can now pull the headlight assembly from the vehicle.

Step 5: Disconnect the wiring harness on the back of the assembly.

NOTE: If you purchased your replacement headlight from Go-Parts, it likely includes the bulbs (as most of our models do). This saves you time, and allows you to move on to the installation of the new assembly.

Step 6: Connect the wiring harness to the new headlight assembly and move it into position.

Step 7: Secure the marker light by tightening the T2 mounting screws.

Step 8: Tighten the T2 screw that rests between the headlight assembly and the blinker.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998 Jeep Grand Cherokee Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.