Español: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1993-1998 Jeep Grand Cherokee Serpentine Belt Replacement

Fits years: 1993, 1994, 1995, 1996, 1997, 1998

All Jeep Grand Cherokee for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • 15mm socket/ratchet with extension

  • 15mm wrench


Step 1: Open the vehicle's hood.

Step 2: Disconnect the wiring harness (1) that attaches near the belt on the PASSENGER'S side of the vehicle. Behind this bolt is the belt tensioner bolt (1). DO NOT loosen this bolt yet.

Step 3: Using the 15mm wrench, loosen the 15mm bolt (1) located on the pulley located near the TOP of the assembly (just behind the radiator).

Step 4: Using the 15mm socket/ratchet with extension, loosen the 15mm tensioner bolt (1), releasing the tension on the belt. You can now remove the belt from the vehicle.

Step 5: Using the routing diagram posted near the radiator, on the UNDERSIDE of the hood, or in the owner's manual, route the belt around the proper pulleys.

Step 6: Once the belt is in place, you can tighten the 15mm tensioner bolt (1), securing its position.


NOTE: The belt should be taut, but not overly tight or stretched.

Step 7: Tighten the 15mm bolt (1) on the UPPER pulley.

Step 8: Reconnect the wiring harness (1) near the tensioner bolt.
These Part Change / Installation Instructions Apply to:

93 1993, 94 1994, 95 1995, 96 1996, 97 1997, 98 1998 Jeep Grand Cherokee Replacement Instructions

Average Rating: 4.9 of 5 stars
13 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.