Start Here

How do you Change, Replace, or Install Broken 1994-2002 Dodge Ram Headlight Replacement

Fits years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002

All Dodge Ram 3500 for sale Tools required:
  • 10mm wrench

  • 10mm socket/ratchet with extension

  • Towels with a putty knife or clip tool

  • Phillips screwdriver

Step 1: By covering the putty knife or clip tool with a rag to protect the paint, remove the gasket that surrounds the headlight assembly.

Step 2: Using a Phillips screwdriver, remove the retaining screws that hold the parking light in place.

Step 3: Pull the parking light from the vehicle and disconnect the wiring harness.

Step 4: Using the 10mm socket /ratchet with extension, remove the three 10mm retaining bolts that secure the headlight assembly into place.

Step 5: Locate the retaining pin that is near the upper rear of the assembly and disengage it to remove the assembly from the vehicle.

Step 6: Gently remove the headlight assembly.

NOTE: If you purchased your replacement headlight from Go-Parts, the bulbs are likely included with the replacement. This can save you time, as you can move directly on to Step 7!

Step 7: Connect the wiring harness to the new headlight assembly.

Step 8: Engage the retaining clip near the back of the assembly.

Step 9: Tighten the 10mm retaining bolts to secure the headlight assembly.

Step 10: Replace the gasket pins to secure the rubber protective gasket.

Step 11: Reconnect your parking light and secure it into place.
These Part Change / Installation Instructions Apply to:

94 1994, 95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Dodge Ram 3500 Replacement Instructions

Average Rating: 4.9 of 5 stars
21 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.