Start Here

How do you Change, Replace, or Install Broken 1995-1999 Toyota Avalon Side Mirror Replacement

Fits years: 1995, 1996, 1997, 1998, 1999

All Toyota Avalon Mirror for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 10mm socket/ratchet with extension

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Using the flathead screwdriver, remove the small, triangular trim panel that covers the side mirror's mounting point.

Use the screwdriver as a lever to gently pry the panel free of the vehicle.

Step 2: Using the flathead screwdriver, remove the interior door handle bezel.

Step 3: Using the flathead screwdriver, remove the power window switch-panel.

Step 4: Disconnect the wiring harnesses from the back of the window switch panel.

Step 5: Remove the 3 circular screw covers on the interior door panel.

Two of these covers are located near the door hinge, while the other is located near the door pull.

Step 6: Remove the small screw cover near the door catch.

Step 7: Remove the 8 Phillips screws that hold the interior door panel in place.

You will find 4 lining the bottom of the panel, 2 near the door hinge, 1 behind the switch panel, and 1 near the door's arm-rest.

Step 8: You can now lift and remove the interior door panel from the door frame.

Step 9: Disconnect the interior door light's wiring harness.

Step 10: Disconnect the side mirror's wiring harness.

It is located in the door frame near the speaker.

Step 11: Release the clip that holds the wiring to the door frame.

Step 12: Loosen and remove the three 10mm mounting bolts that secure the side mirror to the door.

NOTE: Be sure to hold onto the mirror as you loosen the last bolt, as you don't want to sweep broken glass from your garage floor or driveway!

Step 13: Mount the new side mirror to the vehicle by feeding the wiring through its respective opening and tightening the three 10mm retaining bolts.

Step 14: Connect the mirror's wiring harness to the vehicle and attach it to the door frame using the retaining clip.

Step 15: Begin reattaching the interior door panel by reconnecting the wiring harnesses, tightening the 8 Phillips screws, and replacing the plugs that cover the screws.

Step 16: Reattach the trim panels and window switch plate.

Be sure that you reconnect the switch-plate's wiring harness!
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996, 97 1997, 98 1998, 99 1999 Toyota Avalon Mirror Replacement Instructions

Average Rating: 4.8 of 5 stars
22 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.