EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1995-2000 Chevrolet Tahoe Engine Spark Plug Wire Replacement

Fits years: 1995, 1996, 1997, 1998, 1999, 2000

All Chevrolet Tahoe for sale Tools required:

  • 12mm socket/ratchet with extension


Step 1: Open the vehicle's hood.

Step 2: Disengage the retaining clips (2) that secure the air box cover to the assembly.

Step 3: Disconnect the air box's wiring harnesses (2). Unplug the hose from the air intake hose (where the intake hose meets the engine).

Step 4: Loosen and remove the 12mm bolt (1) on TOP of the engine, which connects the air intake assembly to the engine. You can now remove the air intake hose assembly.


NOTE: The spark plug wires will usually vary in length. The longest wires reach across the engine (from the distributor cap) to the first two cylinders.

Step 5: Twist and pull the FIRST spark plug wire from the distributor cap. DO NOT pull them all from the distributor cap at the same time.

Step 6: Twist and pull the OTHER END of the spark plug wire from the spark plug/cylinder.

Step 7: Connect the spark plug wire at BOTH ends. Be sure that the boot is snugly connected to each side.

Step 8: Repeat this process for the remaining spark plug wires.


NOTE: Remember, only do them one at a time!
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000 Chevrolet Tahoe Replacement Instructions

Average Rating: 5 of 5 stars
29 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.