EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1995-2005 Chevrolet Cavalier, Pontiac Sunfire Blower Motor Resistor Replacement

Fits years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Chevrolet Cavalier for sale Tools required:
  • 6mm socket/ratchet

  • 7mm socket/ratchet

  • Socket U-joint with extension


Step 1: Loosen and remove the 7mm bolts (3) that hold the protective panel in place beneath the glove compartment. Remove this panel.

Step 2: Disconnect the blower motor resistor's wiring harness (1).

Step 3: Loosen and remove the 6mm bolts (2) that secure the resistor to the component.


You will need to use the U-joint and an extension to reach the bolt.

Step 4: Mount the resistor to the component by tightening the 6mm bolts (2).

Step 5: Connect the resistor's wiring harness (1).

Step 6: Tighten the 7mm bolts (3) that secure the protective panel to the underside of the glove compartment.
These Part Change / Installation Instructions Apply to:

95 1995, 96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chevrolet Cavalier Replacement Instructions

Average Rating: 5 of 5 stars
11 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.