Start Here

How do you Change, Replace, or Install Broken 1996-2002 Toyota 4Runner AC Heater Blower Motor Replacement

Fits years: 1996, 1997, 1998, 1999, 2000, 2001, 2002

All Toyota 4Runner Blower Motor for sale Tools required:
  • 8mm socket/ratchet with extension (T25 Driver will also work)

  • Phillips screwdriver

Step 1: Open the passenger's side door.

Step 2: Loosen and remove the 4 Phillips screws that hold the door/floor trim panel in place.

Step 3: Lift and remove this panel.

Step 4: Remove the small panel that is in the lower corner of the door (near the glove compartment).

Step 5: Locate the blower motor just underneath the glove compartment.

Step 6: Disconnect the wiring harness by depressing the small tab and pulling on the plug.

Step 7: Using the 8mm socket/ratchet (or T25 Driver), remove the 3 retaining screws.

Step 8: You can now remove the blower motor from the vehicle.

Step 8: Insert the replacement blower motor, and secure it by tightening the three 8mm retaining screws.

Step 9: Connect the wiring harness.

Step 10: Reattach the small corner panel.

Step 11: Reattach the door/floor trim panel.
These Part Change / Installation Instructions Apply to:

96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Toyota 4Runner Blower Motor Replacement Instructions

Average Rating: 4.9 of 5 stars
17 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.