EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1996-2002 Toyota 4Runner AC Heater Blower Motor Replacement

Fits years: 1996, 1997, 1998, 1999, 2000, 2001, 2002

All Toyota 4Runner Blower Motor for sale Tools required:
  • 8mm socket/ratchet with extension (T25 Driver will also work)

  • Phillips screwdriver


Step 1: Open the passenger's side door.

Step 2: Loosen and remove the 4 Phillips screws that hold the door/floor trim panel in place.

Step 3: Lift and remove this panel.

Step 4: Remove the small panel that is in the lower corner of the door (near the glove compartment).

Step 5: Locate the blower motor just underneath the glove compartment.

Step 6: Disconnect the wiring harness by depressing the small tab and pulling on the plug.

Step 7: Using the 8mm socket/ratchet (or T25 Driver), remove the 3 retaining screws.

Step 8: You can now remove the blower motor from the vehicle.

Step 8: Insert the replacement blower motor, and secure it by tightening the three 8mm retaining screws.

Step 9: Connect the wiring harness.

Step 10: Reattach the small corner panel.

Step 11: Reattach the door/floor trim panel.
These Part Change / Installation Instructions Apply to:

96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Toyota 4Runner Blower Motor Replacement Instructions

Average Rating: 4.9 of 5 stars
17 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.