Start Here

How do you Change, Replace, or Install Broken 1996-2007 Ford Taurus AC Heater Blower Motor Replacement

Fits years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Ford Taurus Blower Motor for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 8mm socket/ratchet with extension

Step 1: Locate the protective panel that is beneath the glove compartment on the passenger's side of the vehicle.

Step 2: Gently pull on the panel (near the clips) to disengage the retaining clips.

Step 3: With the blower motor now exposed, locate the three 8mm retaining bolts that hold the component in place and remove them.

NOTE: If you do not have an extension, you can remove the glove compartment door quite easily and access them through the opening created.

Step 4: Disconnect the wiring harness from the blower motor.

Step 5: Remove the blower motor from the vehicle.

Step 6: Mount the new blower motor component by tightening the 3 retaining bolts.

NOTE: Be sure to move the wiring harness out of the way, as you'll need to connect it in the next step!

Step 7: Connect the wiring harness to the new blower motor.

Step 8: Reattach the protective panel by simply snapping the small retaining tabs into their respective holes.
These Part Change / Installation Instructions Apply to:

96 1996, 97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Ford Taurus Blower Motor Replacement Instructions

Average Rating: 4.9 of 5 stars
49 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.