Start Here

How do you Change, Replace, or Install Broken 1997-2003 Chevrolet Malibu Front Door Panel (Interior) Replacement

Fits years: 1997, 1998, 1999, 2000, 2001, 2002, 2003

All Chevrolet Malibu for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • 7mm socket/ratchet with extension

  • Phillips screwdriver

  • Flathead screwdriver

  • Door Panel Clip Tool (or putty knife)

Step 1: Open the vehicle's door.

Step 2: Pry and life the power window control panel. Disconnect the wiring harnesses from the UNDERSIDE of the control panel.

NOTE: These harnesses may be difficult to remove. If this is the case, use the flathead screwdriver to depress the retaining tabs on the plugs.

Step 3: Pry and remove the triangular trim panel near the side mirror mount.

Step 4: Pry and remove the screw cover located INSIDE the interior door pull. Loosen and remove the 7mm bolts (2).

Step 5: Loosen and remove the Phillips screw (1) inside the interior door handle.

Step 6: Pry and remove the interior door handle's bezel panel. Disengage the retaining clip (1) to remove the locking cable/rod from the back of the handle.

Step 7: Using the door panel clip tool (or putty knife), you can now pry and separate the interior door panel from the door frame.

A series of retaining clips secures the door panel to the frame. By working your way around the outer edge of the panel, you can "pop" them free.

Step 8: The interior door panel should now be free of the door frame.

Step 9: To reattach the panel, move it into position, and with a FIRM, but not too firm, strike near each retaining pin, "snap" them all back into place.

Step 10: Re-engage the retaining clip (1) to secure the locking rod to the back of the interior door handle panel. "Snap" this panel back into place.

Step 11: Reconnect the wiring harnesses to the UNDERSIDE of the power window control panel. Snap this panel back into place.

Step 12: Tighten the 7mm bolts (2). Cover the area with the screw cover.

Step 13: Tighten the Phillips screw (1) inside the interior door handle.

Step 14: Reattach the trim panel near the side mirror mount.
These Part Change / Installation Instructions Apply to:

97 1997, 98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Chevrolet Malibu Replacement Instructions

Average Rating: 5 of 5 stars
45 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.