Start Here

How do you Change, Replace, or Install Broken 1998-2002 Honda Accord Cabin Air Filter

Fits years: 1998, 1999, 2000, 2001, 2002

All Honda Accord Cabin Air Filters for sale Tools required:
  • Phillips screwdriver

  • Flathead screwdriver


Step 1: Open the passenger's side door and remove the fuse panel.

Step 2: Loosen and remove the Phillips screws (2) that secure the bottom panel in place.

Step 3: Remove the panel beneath the glove compartment.

Step 4: Loosen and remove the Phillips screws (3) that line the metal panel (beneath the glove compartment).

Step 5: Open the glove compartment, remove the screw covers (2), and remove the Phillips screws (3).


Two are behind the screw covers, while the third is in the center/top.

Step 6: You can now pull the glove compartment from the vehicle. Disconnect the wiring harness (1) from the glove compartment light.

Step 7: Disengage the tabs (2) that hold the air filter compartment door in place. Pull this door through the BOTTOM of the compartment.

Step 8: You can now pull the filters (2) from the assembly.

Step 9: Insert the new filters (2).


Use the guiding arrows to ensure proper placement. The arrow will point toward the DRIVER'S side.

Step 10: Reattach the assembly cover.

Step 11: Reattach the glove compartment by tightening the Phillips screws (3) and replacing the screw covers (2).

Step 12: Tighten the Phillips screws (3) on the underside of the glove compartment.

Step 13: Reattach the panel beneath the glove compartment, tighten the Phillips screws (2) inside the fuse compartment, and cover the area by reattaching the fuse cover.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Honda Accord Cabin Air Filters Replacement Instructions

Average Rating: 5 of 5 stars
43 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.