Start Here

How do you Change, Replace, or Install Broken 1998-2002 Mercury Grand Marquis Rear Door Handle (Interior) Replacement

Fits years: 1998, 1999, 2000, 2001, 2002

All Mercury Grand Marquis for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • Phillips screwdriver

  • Flathead screwdriver

Step 1: Open the vehicle's REAR door.

Step 2: Pry and life the power window control panel. Loosen and remove the Phillips screws (2) on the UNDERSIDE of the panel, and disconnect the wiring harness (1).

Step 3: Pry and remove the interior door handle's bezel.

Step 4: Pry and remove the screw covers (2) on the interior door pull. Loosen and remove the Phillips screw (1).

Step 5: Loosen and remove the Phillips screw (1) exposed by removing the power window control panel.

Step 6: Loosen and remove the Phillips screw (1) on the BOTTOM edge of the interior door panel.

Step 7: You can now LIFT and remove the interior door panel from the door frame.

Step 8: GENTLY peel back the water shield. Be careful not to tear it, as we'll need to reattach it later!

Step 9: Loosen and remove the Phillips screw (1) that secures the interior door handle to the frame. Slide the assembly toward the HINGE side of the door to disengage it.

Step 10: Disengage the handle from the locking rod (1) attached to the back.

Step 11: Attach the handle to the locking rod, and slide it into position on the door. Tighten the Phillips screw (1).

Step 12: Reattach the water shield.

Step 13: To reattach the interior door panel, slide the panel OVER the locking lever and onto the door frame.

NOTE: Be sure that you feed the wiring harness through the opening in the door.

Step 14: Tighten the Phillips screws (4).

The shorter screws are for the door pull!

Step 15: Reattach the screw covers (2), and the interior door handle's bezel.

Step 16: Reconnect the wiring harness (1), tighten the Phillips screws (2), and snap the power window control panel back into place.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Mercury Grand Marquis Replacement Instructions

Average Rating: 4.8 of 5 stars
46 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.