EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1998-2002 Toyota Corolla Side Mirror Replacement

Fits years: 1998, 1999, 2000, 2001, 2002

All Toyota Corolla Mirrors for sale Tools required:
  • Phillips screwdriver

  • 10mm socket/ratchet


NOTE: If you DO NOT have powered mirrors, you do not need to remove the interior door panel! If you do, proceed directly to Step 1.

Step 1: Remove the Phillips screw located inside the interior door handle.

Step 2: Remove the interior door panel's bezel.


You will need to use a flathead screwdriver to disengage the locking rod attached to it.

Step 3: Using a flathead screwdriver, pry and remove the window control switch-plate. Disconnect the wiring harness attached to it.

Step 4: Pry and remove the panel located on the interior door panel's arm rest.

Step 5: Pry and remove the small triangular trim panel that covers the side mirror's mounting point.

Step 6: Remove the 2 Phillips screws located behind the arm rest's trim panel.

Step 7: Using a Phillips screwdriver, turn and remove the Phillips clip near the door lock.

Step 8: You can now pull the interior door panel away from the door frame.


Remember, you'll have to LIFT it over the door lock!

Step 9: Disconnect the side mirror's wiring harness.

Step 10: Loosen and remove the three 10mm retaining bolts that hold the side mirror in place.


NOTE: Be sure to hold onto the side mirror while removing these bolts, as you don't want to sweep broken glass from your garage floor or driveway!

Step 11: You can now remove the side mirror.

Step 12: Feed the wiring through the door frame's opening, and mount the mirror by tightening the three 10mm retaining bolts.

Step 13: Connect the side mirror's wiring harness.

Step 14: Begin reattaching the interior door panel by re-engaging the Phillips clip and tightening the Phillips screws near the arm rest.

Step 15: Reattach the interior trim panels, and reattach the interior door handle panel. Be sure to re-engage the "opening" rod that attached to the back of the interior door handle before securing the Phillips screw!

Step 16: Reconnect the wiring harness to the window switch-plate, and reattach it to the interior door panel.

Step 17: Tighten the final Phillips screws near the interior door handle.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002 Toyota Corolla Mirrors Replacement Instructions

Average Rating: 4.9 of 5 stars
25 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.