Start Here

How do you Change, Replace, or Install Broken 1998-2003 Dodge Durango Rear Door Panel (Interior) Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003

All Dodge Durango for sale Tools required:

  • Phillips screwdriver


Step 1: Pry and remove the trim panel that runs TOP to BOTTOM on the rear of the door's window.

Step 2: Loosen and remove the Phillips screw (1) exposed by removing this trim panel.

Step 3: Loosen and remove the Phillips screws (4) that secure the door panel to the vehicle.


One is located inside the interior door handle, one is inside the interior door pull, and two are located along the bottom edge of the panel.

Step 4: You can now lift and remove the interior door panel.

Step 5: Disconnect the wiring harness (1) from the back of the interior door panel.

Step 6: Disengage the locking rod (1) from the back of the interior door panel by unlocking the retaining clip.

Step 7: To reattach the door panel, reconnect the wiring harness (1) and re-engage the locking rod (1).

Step 8: Slide the door panel over the lip and onto the door frame.

Step 9: Tighten the Phillips screws (5).

Step 10: Reattach the window's trim panel.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Dodge Durango Replacement Instructions

Average Rating: 4.9 of 5 stars
23 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.