Start Here

How do you Change, Replace, or Install Broken 1998-2004 Dodge Intrepid Alternator, Power Steering Belt Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004

All Dodge Intrepid Alternators for sale Tools required:

  • 15mm wrench

  • 13mm socket/ratchet and a long extension


Step 1: Open the vehicle's hood.

Step 2: Locate the belt routing diagram, which is usually located near the radiator, on the UNDERSIDE of the hood, or in the owner's manual.

Step 3: Turn the 15mm bolt (1) on the belt pulley (near the radiator) COUNTER CLOCKWISE. You need to loosen this pulley a FEW turns to release some of the tension on the belt.


NOTE: You may need to use a second wrench to add leverage, as the space is a little cramped.

Step 4: Loosen the 13mm belt tensioner bolt (1) using the ratchet with a long extension.

Step 5: Once the tension is released from the belt, you can remove it from the vehicle.

Step 6: Using the routing diagram we found in Step 2, route the belt around the proper pulleys.

Step 7: Once the belt is in place, tighten the 13mm belt tensioner bolt (1).


NOTE: The belt should be taut, but not overly tight or stretched!

Step 8: Tighten the 15mm bolt (1) to complete the tensioning of the belt.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Dodge Intrepid Alternators Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.