Start Here

Year

Make

Model

How do you Change, Replace, or Install Broken 1998-2004 Dodge Intrepid Cooling Fan Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004

All Dodge Intrepid Cooling Fans for sale Tools required:
  • 7mm socket/ratchet (6.5 is preferable)

  • 10mm socket/ratchet with extension

  • 13mm socket/ratchet with extension

  • Flathead screwdriver

  • Pliers


Step 1: Lift the vehicle's hood.

Step 2: Using the 7mm socket, remove the headlight assembly's two retaining bolts.


These bolts are located on the top of the headlight assembly.

Step 3: Remove the parking light bulb, disconnect the wiring harnesses from the back of the assembly, and fully remove the assembly from the vehicle.

Step 4: Repeat this headlight removal for the other side.

Step 5: Disengage the retaining pins located between the radiator cover and the bumper. You can access these from the top, when facing the vehicle.


You can use the flathead screwdriver to pull the center of the tab up, and then remove them.

Step 6: Remove the 10mm and 13mm retaining bolts that hold the metal radiator cover in place. These bolts span from one side of the vehicle to the other.

Step 7: Disengage the rivets that are underneath the radiator shield using a flathead screwdriver.

Step 8: You can now remove the radiator shield.


Disconnecting the wiring is optional, but we recommend gently resting it outside the vehicle while still attached.

Step 9: Disconnect the wiring harnesses that attach to the radiator cooling fan.

Step 10: Loosen and remove the four 10mm retaining bolts that secure the radiator fan to the radiator (2 on each side).

Step 11: Disengage the clip located on the top of the radiator fan using a flathead screwdriver.

Step 12: You can now remove the radiator fan from the radiator.

Step 13: Using pliers, remove the clip located on the bottom of the old cooling fan and attach it to the new assembly.

Step 14: Mount the new cooling fan to the radiator by engaging the retaining clip and tightening the four 10mm retaining bolts.

Step 15: Reconnect all of the wiring harnesses to ensure that the new unit is receiving power.

Step 16: Reattach the radiator cover.


Re-engage all of the retaining clips and tighten the 10mm and 13mm bolts.

Step 17: Reinstall the headlight assemblies.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Dodge Intrepid Cooling Fans Replacement Instructions

Average Rating: 4.8 of 5 stars
26 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

NEWSLETTER SIGN UP

© 2015 GO-PARTS. All Rights Reserved.