Start Here

How do you Change, Replace, or Install Broken 1998-2011 Ford Crown Victoria Parking Light Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

All Ford Crown Victoria for sale Tools required:
  • 11mm socket/ratchet with extension

  • Phillips screwdriver


Step 1: Lift the vehicle's hood.

Step 2: Loosen and remove the Phillips screw that is on the outside of the marker light assembly.

Step 3: Remove the 11mm bolt that mounts the marker light to the headlight area.


This bolt is in the area beside the headlight assembly.

Step 4: Remove the radiator panel by loosening the hand-screws that secure it in place.

Step 5: You can now pull the marker light from the vehicle.

Step 6: Disconnect the wiring harness that is attached to the marker light.


NOTE: If you ordered your replacement marker light from Go-Parts, it likely includes a new bulb/socket, as most of our models do. This saves you an installation step! However, if your particular model does include the bulb, simply turn the socket counter-clockwise to remove it, and attach it to the new assembly.

Step 7: Connect the wiring harness to the back of the marker light.

Step 8: Mount the marker light by tightening the 11mm bolt and Phillips screw.

Step 9: Reattach the radiator protective cover.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011 Ford Crown Victoria Replacement Instructions

Average Rating: 4.9 of 5 stars
45 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.