Start Here

How do you Change, Replace, or Install Broken 1998-2011 Ford Crown Victoria Parking Light Replacement

Fits years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

All Ford Crown Victoria for sale Tools required:
  • 11mm socket/ratchet with extension

  • Phillips screwdriver

Step 1: Lift the vehicle's hood.

Step 2: Loosen and remove the Phillips screw that is on the outside of the marker light assembly.

Step 3: Remove the 11mm bolt that mounts the marker light to the headlight area.

This bolt is in the area beside the headlight assembly.

Step 4: Remove the radiator panel by loosening the hand-screws that secure it in place.

Step 5: You can now pull the marker light from the vehicle.

Step 6: Disconnect the wiring harness that is attached to the marker light.

NOTE: If you ordered your replacement marker light from Go-Parts, it likely includes a new bulb/socket, as most of our models do. This saves you an installation step! However, if your particular model does include the bulb, simply turn the socket counter-clockwise to remove it, and attach it to the new assembly.

Step 7: Connect the wiring harness to the back of the marker light.

Step 8: Mount the marker light by tightening the 11mm bolt and Phillips screw.

Step 9: Reattach the radiator protective cover.
These Part Change / Installation Instructions Apply to:

98 1998, 99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011 Ford Crown Victoria Replacement Instructions

Average Rating: 4.9 of 5 stars
45 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.