Start Here

Year

Make

Model

How do you Change, Replace, or Install Broken 1999-2003 Saab 3 Engine Air Filter Replacement

Fits years: 1999, 2000, 2001, 2002, 2003

All Saab 9-3 Cabin Air Filters for sale Tools required:

  • T25 Torx Driver

  • Flathead screwdriver


Step 1: Open the vehicle's hood.

Step 2: Locate the air box assembly on the PASSENGER'S side of the vehicle, just behind the headlight assembly.

Step 3: Using the flathead screwdriver, loosen the air hose clamp (1) that holds the hose to the air box. Slide the hose from the assembly.

Step 4: Loosen and remove the T25 Torx screws (5) that hold the air box cover to the assembly.

Step 5: Lift and remove the air box cover.

Step 6: You can now remove the air filter (1) from the assembly.


NOTE: It's a good idea to clean out the air box a bit. There will likely be plenty of dirt, grit, and debris inside the assembly. This means that the air filter assembly is doing its job!

Step 7: Insert the new air filter (1) into the assembly.

Step 8: Secure the air box cover to the assembly by tightening the T25 Torx screws (5).

Step 9: Secure the hose to the air box by sliding it onto the spout and tightening the flathead clamp (1).
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003 Saab 9-3 Cabin Air Filters Replacement Instructions

Average Rating: 5 of 5 stars
15 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.