Start Here

How do you Change, Replace, or Install Broken 1999-2005 Pontiac Montana Headlight Assembly Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Pontiac Montana Headlights for sale Tools required:
  • Pliers

Step 1: Open the vehicle's hood and remove the 3 wing-nuts holding the headlight assembly in place.

IF the wing-nuts are tightened more than "hand tight", use the pliers to get enough leverage to loosen them.

Step 2: The headlight assembly will now pull straight out from the vehicle frame.

Step 3: Disconnect the electrical plug to completely remove the existing headlight assembly.

Step 4: Connect the electrical plug to the new headlight assembly.

Step 5: Align the pegs on the headlight assembly with the corresponding openings beneath the assembly position, and put the new assembly in place.

Step 6: Re-align the blinker and wing-nut pegs to ensure proper placement.

Step 7: Tighten all of the wing-nuts to ensure that the lighting assembly is not "loose" in any way.

Finger-tight is perfectly acceptable for the wing-nut tightness.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Pontiac Montana Headlights Replacement Instructions

Average Rating: 4.8 of 5 stars
32 Review(s)

Let your friends know this guide can help them!

POPULAR GUIDES RELATED TO: Pontiac Montana Headlights

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.