EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1999-2005 Volkswagen Jetta Headlight Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005

All Volkswagen Jetta Headlight for sale Tools required:
  • T20 Torx driver

  • T27 Torx driver

  • Flathead screwdriver


Step 1: Lift the hood and depress the tab that releases the front grille.

Use the screwdriver to depress the tab. Once the clip near the radiator cap has been released, you can remove the grille.

Step 2: Locate five Torx 27 screws on the top of the front bumper cover and the two bolts that are behind the small, removable panels on the underside of the bumper cover. Remove them.

Step 3: Remove the four Torx 20 bolts on each side to completely remove the bumper cover.

Step 4: Disconnect the parking light from each side of the bumper cover.

Step 5: Remove the four T20 screws that hold the headlight assembly in place.


Two on the top, and two on the bottom.

Step 6: Remove the headlight assembly from the vehicle.

Step 7: Disconnect the electrical harness from the back of the assembly.


NOTE: If you purchased your replacement headlight from Go-Parts, you may not need to remove the bulbs, as they are already included. This can save you steps!

Step 8: Connect the electrical harness to the new headlight assembly.

Step 9: Secure the new assembly by tightening the T20 screws.

Step 10: Put the bumper cover back on by reversing the removal process.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Volkswagen Jetta Headlight Replacement Instructions

Average Rating: 4.8 of 5 stars
72 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.