Start Here

How do you Change, Replace, or Install Broken 1999-2006 GMC Sierra Corner Light / Turn Signal Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

All GMC Sierra for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • None

NOTE: If you are replacing the turn signal assembly due to collision damage, it may be a good idea to replace the headlight assembly, as well. In this project, we will be removing the headlight, so it will never be easier to replace than right now!

Step 1: Open the vehicle's hood.

Step 2: Twist, lift, and remove the two mounting tabs that secure the headlight in place.

Step 3: Pull the headlight out and disconnect the wiring harnesses attached to the back of the assembly.

Step 4: Depress the retaining lever (located to the outer edge of the parking light), and pull the assembly through the front of the vehicle.

Step 5: Twist and remove the bulbs/sockets from the parking light assembly.

Step 6: Insert the bulbs/sockets into the new parking light, and mount it by engaging the retaining clip.

Insert the inner tab first, and then snap the assembly into place.

Step 7: Reconnect the wiring harnesses to the headlight assembly, and secure it by re-engaging the mounting tabs.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006 GMC Sierra Replacement Instructions

Average Rating: 4.8 of 5 stars
40 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.