EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1999-2007 Chevrolet Silverado Rear Gate Handle Replacement

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Chevrolet Silverado for sale Tools required:
  • 1/2 inch wrench


Step 1: Remove the exterior tailgate handle panel.

Depress on the top of the handle, and pull out, as the tabs are directed downward.

Step 2: Using the 1/2 inch wrench, remove the three bolts that secure the tailgate handle in place.

If you have a sprayed-on bed liner, you'll need to use a box-cutter or other blade to cut the lining to free the bolts for removal.

Step 3: Depress the interior clips, and pull the rods outward, releasing the old tailgate handle.

NOTE: Before installing your new handle, it's always a good idea to use penetrating oil to help you lubricate all of the joints. This will help the function of the handle over time!

Step 4: Insert your new tailgate handle.

You may need to wiggle the new handle a bit to properly fit it into the door. Pop the rods and clips into place.

Step 5: Tighten the three bolts on the back of the tailgate handle.

Step 6: Attach the framing bezel on the tailgate handle.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Chevrolet Silverado Replacement Instructions

Average Rating: 5 of 5 stars
45 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.