EspaƱol: (916) 374-7279
Start Here

How do you Change, Replace, or Install Broken 1999-2007 Ford F-Series Super Duty Pickup AC Heater Blower Motor

Fits years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

All for sale Tools required:
  • 8mm socket/ratchet with extension

  • 10mm socket/ratchet with extension


Step 1: Using the 10mm socket, remove the two 10mm bolts that secure the junction box in place.

The junction box is located just below the blower motor.

Step 2: Remove the rubber hose from the blower motor and remove the lower bolt that holds the blower motor in place. Disconnect the wiring harness from the blower motor.

There will be 3 8mm bolts.

Step 3: You can now pull the blower motor from the vehicle.

Step 4: Remove the small rubber tube (and its securing tie) from the old blower motor.

Step 5: Put the gasket around the new blower motor, attach the small rubber hose, and move the component into position.

Step 6: Connect the wiring harness to the new blower motor.

Step 7: Secure the blower motor's position by tightening the 3 8mm retaining bolts.

Step 8: Reattach the small rubber boot.

Step 9: Secure the junction box by tightening the 10mm retaining bolts.
These Part Change / Installation Instructions Apply to:

99 1999, 00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Replacement Instructions

Average Rating: 4.8 of 5 stars
Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.