Start Here

How do you Change, Replace, or Install Broken 2000-2004 Subaru Outback Alternator, Fan Belt Replacement

Fits years: 2000, 2001, 2002, 2003, 2004

All Subaru Outback Alternators for sale Tools required:

  • 10mm socket/ratchet with extension

  • 12mm socket/ratchet with extension


Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 10mm mounting bolts (3) that secure the belt cover to the alternator assembly. Lift and remove the smaller of the two covers.

Step 3: Loosen and remove the 12mm bolt (1) exposed by removing the smaller cover. You can now remove the larger cover.

Step 4: Loosen and remove the 12mm mounting bolt (1) on the PASSENGER'S side of the alternator.

Step 5: Loosen the 12mm belt tensioner bolt (1) located just above the alternator. You can now remove the belt from the vehicle.

Step 6: Route the new belt around the proper pulleys. Once the belt is in place, tighten the 12mm tensioner bolt (1) to secure its position.


NOTE: The belt should be taut, but not overly tight or stretched!

Step 7: With the NEW belt now in place, tighten the 12mm mounting bolt (1).

Step 8: Reattach the larger of the two covers by tightening the 10mm bolt (1).

Step 9: Attach the second cover and tighten the 10mm bolts (2) to secure it.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004 Subaru Outback Alternators Replacement Instructions

Average Rating: 5 of 5 stars
1 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.