Start Here

Year

Make

Model

How do you Change, Replace, or Install Broken 2000-2005 Buick LeSabre Headlight Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005

All Buick LeSabre Headlights for sale Tools required:
  • 10mm socket/ratchet with extension

  • Needle-nose Pliers


Step 1: Lift the vehicle's hood.

Step 2: Loosen and remove the two 10mm bolts located on top of the headlight assembly.

Step 3: You can now pull the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses from the back of the headlight assembly.


NOTE: If you ordered your replacement headlight from Go-Parts, it likely includes new bulbs, as most of our models do. This saves you an installation step! However, if your particular model does not, simply transfer the bulbs and sockets to the new assembly. This process takes just a few moments! You may also need to transfer the wiring harness, though this is only for particular models. This is what the needle-nose pliers are for.

Step 5: Connect the wiring harness to the new headlight assembly.

Step 6: Mount the headlight by tightening the two 10mm retaining bolts.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Buick LeSabre Headlights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.