Start Here

How do you Change, Replace, or Install Broken 2000-2005 Buick LeSabre Side Mirror Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005

All Buick LeSabre Mirror for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 10mm socket/ratchet

  • Flathead screwdriver

  • Phillips screwdriver

  • Door panel clip tool (or putty knife)

Step 1: Open the vehicle's door.

Step 2: Remove the small trim panel that covers the mirror's mounting area.

Step 3: Disconnect the wiring harness that powers the speaker.

Step 4: Using the flathead screwdriver, gently pry on the interior door handle bezel and remove the panel.

Step 5: Disconnect the wiring harness on the back of the interior door handle panel.

Step 6: Using the flathead screwdriver, remove the small reflector cover.

Step 7: Remove the Phillips screws located behind the reflector that was just removed, and behind the interior door handle's panel.

Step 8: Using the clip tool (or putty knife), gently pry the interior door panel away from the door frame.

Step 9: Disconnect the wiring harnesses attached to the back of the interior door panel.

Step 10: Remove the foam inside the mirror's mounting area.

Step 11: Disconnect the wiring from its retaining clips and disconnect the wiring harness that powers the side mirror.

Step 12: Loosen and remove the three 10mm bolts that hold the mirror to the vehicle.

NOTE: Be sure to hold onto the side mirror while removing these bolts, as you don't want to sweep broken glass from your garage floor or driveway!

Step 13: You can now remove the side mirror.

Step 14: Insert the wiring through the opening in the door frame and mount the side mirror by tightening the three 10mm retaining bolts.

Step 15: Attach the wiring to the door frame using the clips and connect the wiring harness to power the new mirror.

Step 16: Reconnect the wiring harnesses to the interior door panel and begin reattaching the panel to the frame. Be sure to secure all Phillips screws in the process!

Step 17: Reattach the trim panels, interior door handle bezel, and reconnect all wiring harnesses.

Step 18: Don't forget to add the reflector plate to the interior door frame!
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Buick LeSabre Mirror Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.