Start Here

How do you Change, Replace, or Install Broken 2000-2007 Chevrolet Monte Carlo Power Window Switch Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Chevrolet Monte Carlo for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • T27 Torx Driver

  • Flathead screwdriver

  • Phillips screwdriver

  • Door Panel Clip Tool (or putty knife)

Step 1: Loosen and remove the T27 Torx screws (2) located just below the interior door pull.

Step 2: Loosen and remove the Phillips screws (2) located inside the interior door handle and near the side mirror mount.

Step 3: Pry and remove the interior door handle bezel. Disconnect the wiring harness attached to the back of the panel.

Step 4: Using the door panel clip tool (or putty knife) to pry the interior door panel way from the frame.

A series of clips hold the panel to the door frame. You will hear them "pop" as they disengage.

Step 5: You can now remove the interior door panel. Disconnect the wiring harnesses (2) from the back of the interior door panel.

Step 6: Loosen and remove the Phillips screws (3) to remove the metal mounting plate.

Step 7: Loosen and remove the Phillips screw (1) inside the interior door pull (on the door panel). Remove the interior door pull cup.

Step 8: Push the window control switch-panel through the EXTERIOR of the interior door panel.

NOTE: This will take some maneuvering, as the panel is in there pretty tight!

Step 9: Disengage the retaining tabs to pry and remove the power window switch from the switch-panel.

Step 10: Attach the new power window switch by "snapping" it into place.

Step 11: Reattach the window control switch-panel to the interior door panel.

Step 12: Reattach the interior door pull cup by tightening the Phillips screw (1).

Step 13: Reattach the mounting bracket (to the back of the interior door panel) by tightening the Phillips screws (3).

Step 14: Reconnect the wiring harnesses.

Step 15: Reattach the interior door panel.

Simply reverse the removal process. Be sure to tighten all screws and snap all retaining clips back into place!
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Chevrolet Monte Carlo Replacement Instructions

Average Rating: 4.9 of 5 stars
0 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.