Start Here

How do you Change, Replace, or Install Broken 2000-2007 Ford Taurus Tail Light Replacement

Fits years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Ford Taurus Tail Lights for sale Tools required:
  • 11mm socket/ratchet


Step 1: Open the vehicle's trunk.

Step 2: Remove the hand-pin that holds the trunk liner in place.


This pin is located just inside the trunk, behind the tail light assembly.

Step 3: Gently pull the trunk liner away from the tail light assembly.

Step 4: Locate and remove the three 11mm retaining bolts.


They are the bolts that hold the tail light assembly to the vehicle's chassis.

Step 5: Disconnect the wiring harnesses on the back of the assembly.

Step 6: You can now pull the tail light assembly from the vehicle.

Step 7: Connect the wiring harnesses to the back of your new tail light assembly.

Step 8: Move it into position, and tighten the assembly into place by tightening the three 11mm retaining bolts.

Step 9: Cover the area by moving the trunk liner into place and securing with the hand-pin.
These Part Change / Installation Instructions Apply to:

00 2000, 01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Ford Taurus Tail Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
49 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.