Start Here

How do you Change, Replace, or Install Broken 2001-2003 Chrysler PT Cruiser Ignition Coil Replacement

Fits years: 2001, 2002, 2003

All Chrysler PT Cruiser for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • 8mm socket/ratchet with extension

  • 10mm socket/ratchet with extension

  • 13mm socket/ratchet with extension

  • Flathead screwdriver

  • 2x4 or similar square of wood

Step 1: Open the vehicle's hood.

Step 2: Loosen and remove the 13mm mounting bolt (1) located just below where the air intake hose attaches to the engine.

Step 3: Loosen and remove the 13mm bolt (1) on the BACK of the intake manifold. This bolt secures the EGR tube to the engine.

Step 4: Loosen and remove the 8mm bolt (1) that secures the EGR tube to the back of the engine. You can now remove the mounting bracket.

Step 5: Loosen and remove the 8mm bolts (5) that span the FRONT of the intake manifold.

Step 6: You can now lift the air intake manifold. Support it above the engine using a 2x4 or block of wood.

Step 7: Disconnect the spark plug wires that attach to the ignition coil.

NOTE: Be sure that you remember which wires attach to which position on the coil! When we reattach them, they need to be in the RIGHT PLACE!

Step 8: Using the flathead screwdriver, release the RED locking clip. Depress the mounting tab.

Step 9: Loosen and remove the 10mm bolts (4) that secure the ignition coil to the engine. You can remove the ignition coil.

Step 10: Mount the NEW ignition coil by tightening the 10mm bolts (4). Be sure that the mounting tab and clip are secured!

Step 11: Attach the spark plug wires to the ignition coil. Remember, they have to be in the proper position!

Step 12: Reattach the air intake manifold by tightening the 8mm bolts (5).

Step 13: Secure the EGR tube to the back of the engine by tightening the 8mm (1) and 13mm (1) bolts.

Step 14: Tighten the 13mm bolt (1) just below where the air intake hose attaches to the engine.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003 Chrysler PT Cruiser Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.