Start Here

How do you Change, Replace, or Install Broken 2001-2005 Chrysler PT Cruiser Fog Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005

All Chrysler PT Cruiser Fog Light for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • Jack/Stands

  • 7mm socket/ratchet

  • 10mm socket/ratchet

  • Flathead screwdriver

  • Tire Iron (can also use 19mm socket/ratchet/breaker bar

Step 1: Lift the vehicle and secure its position.

Step 2: Locate the plastic protection panel's retaining pin and remove it with the flathead screwdriver.

Step 3: Remove the three 7mm screws that hold the panel in place.

Step 4: Remove the 10mm retaining bolt that holds the lower horn in place.

Step 5: Loosen and remove the 10mm retaining bolts that hold the light in place.

Step 6: You can now remove the fog light assembly.

Step 7: Disconnect the wiring harness from the back of the fog light.

Step 8: Connect the wiring harness to the back of the new fog light assembly.

Step 9: Secure it into place by tightening the 10mm retaining bolts on the back of the assembly.

Step 10: Reattach the lower horn by tightening the 10mm retaining bolt.

Step 11: Reattach the protective panels that cover the back of the light mounting area.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chrysler PT Cruiser Fog Light Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.