Start Here

How do you Change, Replace, or Install Broken 2001-2005 Chrysler PT Cruiser Fog Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005

All Chrysler PT Cruiser Fog Lights for sale Tools required:
  • Jack/Stands

  • 7mm socket/ratchet

  • 10mm socket/ratchet

  • Flathead screwdriver

  • Tire Iron (can also use 19mm socket/ratchet/breaker bar

Step 1: Lift the vehicle and secure its position.

Step 2: Locate the plastic protection panel's retaining pin and remove it with the flathead screwdriver.

Step 3: Remove the three 7mm screws that hold the panel in place.

Step 4: Remove the 10mm retaining bolt that holds the lower horn in place.

Step 5: Loosen and remove the 10mm retaining bolts that hold the light in place.

Step 6: You can now remove the fog light assembly.

Step 7: Disconnect the wiring harness from the back of the fog light.

Step 8: Connect the wiring harness to the back of the new fog light assembly.

Step 9: Secure it into place by tightening the 10mm retaining bolts on the back of the assembly.

Step 10: Reattach the lower horn by tightening the 10mm retaining bolt.

Step 11: Reattach the protective panels that cover the back of the light mounting area.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005 Chrysler PT Cruiser Fog Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
28 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.