Start Here

How do you Change, Replace, or Install Broken 2001-2007 Dodge Caravan, Chrysler Town & Country, Plymouth Voyager Turn Signal Switch Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Dodge Caravan for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • Phillips screwdriver

  • Flathead screwdriver (small)

Step 1: Loosen and remove the Phillips screws (3) on the underside of the steering column.

Step 2: Separate the UPPER and LOWER trim panels surrounding the steering column and remove them.

They are held together by retaining clips built into the molding. It will take a FIRM tug to separate them, but be careful not to break the clips!

Step 3: Using the small flathead screwdriver, depress the retaining tab to release the wiring harness (1).

Step 4: Loosen and remove the Phillips screws (2) that hold the switch to the steering column.

Step 5: You can now remove the switch from the vehicle.

Step 6: Mount the new turn signal switch to the steering column by tightening the Phillips screws (2).

Step 7: Connect the wiring harness to the turn signal switch.

Step 8: Reattach the UPPER and LOWER trim panels to the steering column.

Step 9: Tighten the Phillips screws (3) to hold the trim panels in place.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Dodge Caravan Replacement Instructions

Average Rating: 4.8 of 5 stars
4 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.