Start Here




How do you Change, Replace, or Install Broken 2001-2007 Toyota Sequoia Fog Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007

All Toyota Sequoia Fog Lights for sale Tools required:
  • 10mm socket/ratchet

  • Flathead screwdriver

  • Pliers

Step 1: From underneath the vehicle, remove the three 10mm bolts that hold the plastic panel in place.

This panel covers the fog light mounting area.

Step 2: Disconnect the fog light's wiring harness.

Step 3: Using the flathead screwdriver, gently pry the sides of the fog light assembly outward until you hear the clips disengage.

Step 4: Using the pliers, depress the locking tab, and push the assembly through the FRONT of the vehicle.

NOTE: Adjust your fog light's beam by lengthening or shortening the adjustment stud to match that of the old assembly.

Step 5: Insert the new fog light assembly through the front of the vehicle. By pushing the fog light into position, you should feel the locking tabs engage, securing the assembly.

Step 6: Connect the fog light's wiring harness.

Step 7: Reattach the protective panel by tightening the 10mm bolts that hold it in place.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007 Toyota Sequoia Fog Lights Replacement Instructions

Average Rating: 4.9 of 5 stars
47 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.