Start Here

How do you Change, Replace, or Install Broken 2001-2008 Chrysler, Dodge Caravan, Town and Country Rear Power Vent Window Motor Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008

All Dodge Caravan for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:

  • 10mm socket/ratchet with extension

  • 15mm socket/ratchet with extension

  • Flathead screwdriver

  • Pliers

Step 1: Open the vehicle's REAR hatch door.

Step 2: Loosen and remove the 15mm bolt (1) just above the seat belt's mounting point. You can now lower the seat belt harness.

Step 3: Pry and remove the trim that lines the BOTTOM of the door jamb.

Step 4: Pry and remove the trim that lines the TOP of the door jamb.

Step 5: Pry and remove the trim that lines the SIDE of the door jamb.

Step 6: Using the flathead screwdriver, pry and disengage the retaining pin (1) that secures the assembly to the window.

Step 7: Loosen and remove the 10mm bolts (3) that secure the motor assembly to the vehicle. Disconnect the assembly's wiring harness (1).

Step 8: Connect the wiring harness (1) to the new motor assembly. Secure it to the vehicle by tightening the 10mm bolts (3).

Step 9: Engage the retaining clip (1) to secure the assembly to the window.

Step 10: Reattach the trim panels (3).

Step 11: Secure the seatbelt assembly by tightening the 10mm bolt (1).
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008 Dodge Caravan Replacement Instructions

Average Rating: 4.8 of 5 stars
4 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.