Start Here

How do you Change, Replace, or Install Broken 2001-2011 Ford Ranger Parking Light Replacement

Fits years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011

All Ford Ranger Turn Signal Light for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 6 mm socket/ratchet

Step 1: Lift the vehicle's hood.

Step 2: Disengage the two retaining clips located on the top of the headlight assembly.

Step 3: You can now pull the headlight assembly from the vehicle.

Step 4: Disconnect the wiring harnesses on the back of the headlight assembly to completely remove it.

Step 5: Loosen the two 6mm retaining bolts that hold the parking light assembly in place.

Step 6: You can now pull the parking light assembly from the vehicle.

Step 7: Disconnect the wiring harness from the back of the parking light.

Step 8: Connect the wiring harness to the back of the new parking light assembly and move it into place.

Step 9: Secure the parking light by tightening the two 6mm retaining bolts.

Step 10: Reattach the headlight wiring harnesses and lock it into place by engaging the two retaining clips.
These Part Change / Installation Instructions Apply to:

01 2001, 02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009, 10 2010, 11 2011 Ford Ranger Turn Signal Light Replacement Instructions

Average Rating: 4.8 of 5 stars
48 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.