Start Here

How do you Change, Replace, or Install Broken 2002-2005 Chevrolet Trailblazer Serpentine Belt Tensioner Replacement

Fits years: 2002, 2003, 2004, 2005

All Chevrolet Trailblazer for sale Tools required:

  • 3/8 Drive ratchet

  • 15mm socket/ratchet


Step 1: Open the vehicle's hood.

Step 2: Locate the belt routing diagram usually posted near the radiator, on the UNDERSIDE of the hood, or in the owner's manual.

Step 3: Insert the 3/8 drive ratchet nub (square) into the belt tensioner, and turn the handle CLOCKWISE to release the tension on the belt. You can now remove the serpentine belt from the vehicle.


NOTE: If your belt looks worn or frayed, we recommend changing it now. Since we already have it off of the pulleys, it'll never be easier than it is right now!

Step 4: Loosen and remove the 15mm bolt (1) that secures the tensioner to the engine.

Step 5: You can now remove the belt tensioner from the vehicle.

Step 6: Mount the new belt tensioner to the engine by tightening the 15mm bolt (1).


Use the guiding tab on the tensioner to ensure proper placement.

Step 7: Using the diagram we located in Step 2, route the serpentine belt properly around the pulleys.

Step 8: Once the belt is in place, use the 3/8 drive ratchet handle to turn the tensioner COUNTER CLOCKWISE, increasing the tension on the belt and securing its position.


NOTE: The belt should be taut, but not overly tight or stretched.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005 Chevrolet Trailblazer Replacement Instructions

Average Rating: 5 of 5 stars
19 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.