Start Here

How do you Change, Replace, or Install Broken 2002-2006 Honda CR-V Front Bumper Cover Replacement

Fits years: 2002, 2003, 2004, 2005, 2006

All Honda CR-V for sale Tools required:

  • 8mm socket/ratchet with extension

  • 10mm socket/ratchet with extension

  • Flathead screwdriver

Step 1: Lift the vehicle's hood.

Step 2: Using the flathead screwdriver, disengage and remove the retaining pins (6) that line the top of the bumper cover/radiator grille.

To remove these pins, simply pry UP on the center. This allows the clip to be removed.

Step 3: Loosen and remove the 8mm bolt (2 " 1 per side) located inside the wheel well.

Step 4: Loosen and remove the 10mm bolts (4 " 2 per side) located on the UNDERSIDE of the front bumper cover.

Step 5: Disengage and remove the retaining pins (2) located on the UNDERSIDE of the front bumper cover.

Step 6: You can now PULL and remove the front bumper cover from the vehicle.

Step 7: To reattach the front bumper cover, simply "snap" the cover into place. Secure it by first tightening the 8mm bolts (2) and 10mm bolts (4).

Step 8: Re-engage the retaining pins (8) to finalize the installation.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006 Honda CR-V Replacement Instructions

Average Rating: 4.9 of 5 stars
46 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.