Start Here

How do you Change, Replace, or Install Broken 2002-2006 Honda CR-V Side Mirror Replacement

Fits years: 2002, 2003, 2004, 2005, 2006

All Honda CR-V Mirror for sale

Looking for the part mentioned in this article?
Please click here to tell us what you’re looking for, we’ll contact you within the next few hours with price and availability.

Tools required:
  • 8mm socket/ratchet

  • Flathead screwdriver

  • Phillips screwdriver

Step 1: Open the vehicle's door.

Step 2: Depress the center of the retaining clip (1) just below the mirror's mounting area, and remove the pin from the door panel.

Step 3: Pry and remove the small trim panel inside the interior door handle. Remove the Phillips screws (2).

Step 4: Pry and remove the window control switch-panel. Disconnect the wiring harnesses from the underside of the panel.

Step 5: Pry and remove the small trim panel that covers the mirror's mounting area.

Step 6: Loosen and remove the Phillips screws (2) that are below the door panel armrest.

Step 7: Pry and remove the interior door handle's outer bezel. Disconnect the wiring harness (1). Disengage the tab to release the door handle.

Step 8: Pry and remove the interior door panel.

There is a series of clips that hold the door panel to the door frame. You will hear them "pop" as they release.

Step 9: Disconnect the wiring harnesses (3) from the back of the interior door panel.

Step 10: Peel back the water shield. BE CAREFUL not to tear it!

You only need to peel the water shield back enough to expose the mirror's wiring harness.

Step 11: Disconnect the side mirror's wiring harness. Disengage the clip that attaches the wiring bundle to the door frame.

Step 12: Loosen and remove the 8mm mounting bolts (3) that secure the mirror to the door.

Be sure to hold onto the mirror while removing these bolts, as you don't want to sweep broken glass from your garage floor or driveway!

Step 13: You can now remove the side mirror.

Step 14: Feed the wiring harness through the opening in the door frame, and mount the mirror by tightening the 8mm bolts (3).

Step 15: Connect the side mirror's wiring harness and engage the clip to hold the wiring bundle to the door frame.

Step 16: Reattach the water shield.

Step 17: Reattach the interior door panel.

Simply reverse the removal process. Be sure to reconnect all wiring harnesses, tighten the Phillips retaining screws (4), re-engage the clip beneath the mirror (1), and reattach the bezels and trim panels!
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006 Honda CR-V Mirror Replacement Instructions

Average Rating: 4.9 of 5 stars
46 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-273-4760

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.