Start Here

How do you Change, Replace, or Install Broken 2002-2009 Chevrolet Trailblazer Side Mirror Replacement

Fits years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

All Chevrolet Trailblazer Mirrors for sale Tools required:
  • 10mm socket/ratchet with extension

  • Flathead screwdriver (small and medium)


Step 1: Open the vehicle's door.

Step 2: Using the flathead screwdriver, gently pry up the window control switch-panel. Disconnect the wiring harnesses attached to the underside of the panel. Fully remove the panel.

Step 3: Using the small screwdriver, depress the tabs on the interior of the door handle trim panel. Remove this panel.

Step 4: Loosen and remove the two 10mm bolts located near the interior door pull.

Step 5: Gently remove the interior door panel by working your way around it, and pulling outward to disengage the retaining clips.

Step 6: Remove the interior door panel.

Step 7: Remove the insulation that is inside the side mirror's mounting area.

Step 8: Disconnect the side mirror's wiring harness.

Step 9: Loosen and remove the three 10mm retaining bolts that hold the mirror to the door frame.


NOTE: Be sure to hold onto the side mirror while loosening the retaining bolts, as you likely don't want to sweep broken glass from your garage floor or driveway!

Step 10: Feed the wiring harness through the door frame, and mount the mirror by tightening the 10mm retaining bolts.

Step 11: Connect the mirror's wiring harness. Be sure to reattach it to the door with its clip!

Step 12: Reattach the interior door panel.


Simply reverse the removal process.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009 Chevrolet Trailblazer Mirrors Replacement Instructions

Average Rating: 5 of 5 stars
19 Review(s)

Let your friends know this guide can help them!



© 2015 GO-PARTS. All Rights Reserved.