Start Here

How do you Change, Replace, or Install Broken 2002-2009 Chevrolet Trailblazer Tail Light Replacement

Fits years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

All Chevrolet Trailblazer Tail Lights for sale Tools required:
  • Phillips screwdriver


Step 1: Open the vehicle's tailgate.

Step 2: Remove the 2 Phillips screws that hold the tail light in place.


These screws are exposed by opening the tailgate.

Step 3: You can now pull the tail light assembly from the vehicle.

Step 4: Disconnect the wiring harness on the back of the assembly.


NOTE: If you ordered your replacement tail light from Go-Parts, it likely includes new bulbs and a connector plate, as most of our models do. This saves you an installation step! However, if your particular model does not include new bulbs and the connector plate, simply remove the Phillips screws that hold the plate in place, remove the bulbs from the tail light, and attach them to the new one. This process only takes a few moments.

Step 5: Connect the wiring harness to the back of the new tail light assembly.

Step 6: Mount the new tail light to the vehicle.


Use the tabs on the tail light as your guides to ensure proper placement. Tighten the 2 Phillips screws to secure the tail light.
These Part Change / Installation Instructions Apply to:

02 2002, 03 2003, 04 2004, 05 2005, 06 2006, 07 2007, 08 2008, 09 2009 Chevrolet Trailblazer Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
19 Review(s)

Let your friends know this guide can help them!



Contact


Go-Parts.com ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.