Start Here

How do you Change, Replace, or Install Broken 2003-2005 Chevrolet Cavalier Tail Light Replacement

Fits years: 2003, 2004, 2005

All Chevrolet Cavalier Tail Lights for sale Tools required:
  • 10mm deep socket/ratchet

  • Flathead screwdriver

Step 1: Open the vehicle's trunk.

Step 2: Using the flathead screwdriver, remove the clip that holds the trunk liner over the tail light's mounting area.

Step 3: Disconnect the wiring harnesses from the back of the tail light assembly.

NOTE: Some models do not use wiring plugs for tail lights. If this is the case for your particular model, simply turn the bulbs/sockets counter-clockwise to remove them from the old assembly and attach them to the new one. This process only takes a few moments!

Step 4: Loosen and remove the 10mm mounting bolts (3) that hold the tail light assembly to the vehicle.

Step 5: You can now remove the tail light.

Step 6: Mount the new tail light assembly by tightening the 10mm mounting bolts (3).

Use the guiding tabs on the tail light to ensure proper positioning and installation.

Step 7: Connect the wiring harnesses to the back of the tail light assembly.

Step 8: Secure the trunk liner over the area by re-engaging the retaining pin.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005 Chevrolet Cavalier Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
11 Review(s)

Let your friends know this guide can help them!


- Email Us -

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.