Start Here

How do you Change, Replace, or Install Broken 2003-2005 Chevrolet Cavalier Tail Light Replacement

Fits years: 2003, 2004, 2005

All Chevrolet Cavalier Tail Lights for sale Tools required:
  • 10mm deep socket/ratchet

  • Flathead screwdriver

Step 1: Open the vehicle's trunk.

Step 2: Using the flathead screwdriver, remove the clip that holds the trunk liner over the tail light's mounting area.

Step 3: Disconnect the wiring harnesses from the back of the tail light assembly.

NOTE: Some models do not use wiring plugs for tail lights. If this is the case for your particular model, simply turn the bulbs/sockets counter-clockwise to remove them from the old assembly and attach them to the new one. This process only takes a few moments!

Step 4: Loosen and remove the 10mm mounting bolts (3) that hold the tail light assembly to the vehicle.

Step 5: You can now remove the tail light.

Step 6: Mount the new tail light assembly by tightening the 10mm mounting bolts (3).

Use the guiding tabs on the tail light to ensure proper positioning and installation.

Step 7: Connect the wiring harnesses to the back of the tail light assembly.

Step 8: Secure the trunk liner over the area by re-engaging the retaining pin.
These Part Change / Installation Instructions Apply to:

03 2003, 04 2004, 05 2005 Chevrolet Cavalier Tail Lights Replacement Instructions

Average Rating: 5 of 5 stars
11 Review(s)

Let your friends know this guide can help them!

Contact ©

Toll-Free: 1-877-321-PART

International: 1-916-993-3700

Our mission

We know how important it is for you to be back on the road, so we strive to make your buying experience as easy and fast as possible.

© 2015 GO-PARTS. All Rights Reserved.